TotilPay Register: How To Set Up Your Woosim Bluetooth Printer

Follow the steps below to pair your Bluetooth printer to your iPad and configure TotilPay Register.

  1. Connect your Bluetooth printer to power and power it on.
  2. Open the Settings app on your iPad.
  3. Tap Bluetooth. Your printer will be displayed as Woosim in the Other Devices section.
  4. Tap Woosim to begin the pairing process. (PIN: 1234)
  5. Tap Pair when prompted to pair by your iPad.
  6. If pairing is unsuccessful, restart your printer and repeat steps 2 through 5.
  7. Login to TotilPay Register on your iPad.
  8. Tap the Configure button in the top-left corner.
  9. Tap Accessories.  The Accessories menu will appear.
  10. Tap Printer to advance to the Select Printer menu.
  11. Tap Woosim to select your printer model and then tap Configure in the top-right.
  12. Confirm that Auto Print and Auto Cut are both toggled ON.
  13. Tap the Configure button in the top-left corner.
  14. Tap Accessories.
  15. Tap Card Reader.
  16. Tap Woosim to select your card reader model.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk