Follow

How to check and update your firmware on your BBPOS Chipper reader

To check and update your firmware please follow the steps below.

 

Please note that this will take 5-10 min and while the update is in progress the app and reader will be unable to process transactions.  We also recommend that the reader either be plugged in or have at least a 50% charge before you begin.  

 

How to update your BBPOS firmware and config file versions.

  1. Login to TotilPay Go as Manager
  2. Tap More in the lower right hand corner
  3. Under SETTINGS tap Transactions
  4. Tap Card Reader
  5. Tap the Configure button in the upper right hand corner.
    • This button is located in the top-right corner and looks like sliding switches.
  6. Under CHECK FOR UPDATES tap Firmware
    1. If there is an available update tap OK otherwise tap Cancel

Your Firmware is now up to date

 

  1. Now Under CHECK FOR UPDATES tap Config
  1. If there is an available update tap OK otherwise tap Cancel

 

Your Config values should now be up to date

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk