Follow

How to Pair Chipper 3X Bluetooth Card Reader with Android Devices for TotilPay Go

1. Press and hold black POWER button on side of card reader to power it on.
2. Log in the TOTILPAY GO app on your Android phone or tablet.
3. Tap MORE in the lower-right corner of screen.
4. Scroll to top of screen and tap TRANSACTION.
5. Tap CARD READER.
a. Color dot at right (green or red) indicates currently selected reader type.
b. Red dot indicates that reader type is not connected.
6. If not already selected, tap CHIPPER BT CARD READER.
7. Tap GRAY ICON in top-right corner of screen (sliding switches).
8. Tap arrow on right side of NAME field.
a. Card reader’s serial number will appear under OTHER DEVICES.
9. Your device will scan for all available Bluetooth devices; if the first item that comes up does
not begin with CHB then tap the GRAY REFRESH ARROW until CHB is found.
10. When your card reader is found, tap the SERIAL NUMBER.
11. Tap OK on the Pairing Request Screen to begin the pairing process
12. Enter your BT Pairing Code. (Your 6 digits Pairing code can be found printed on the back of your reader at the bottom)
a. Pairing is complete when the Firmware and Config versions are listed below the
Device Name.
13. Tap the GRAY LEFT ARROW/(BACK).
14. Confirm the dot next to card reader name is GREEN.
a. Green dot and INFORMATION (circled “ i “) button indicates your card reader is
paired and connected to your device.
b. Tap INFORMATION (circled “ i “) button to view other information about your card
reader, such as battery percentage and firmware version.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk