How to Pair Your Chipper BT Card Reader with an Android

Follow the steps below to pair your Bluetooth card reader with your Android device

1. Open the Settings app on your Android device and enable all 4 requested permissions (Location, Microphone, Phone, Storage) for TotilPay Go (Android UI may vary):
   1. Tap Settings
   2. Tap Applications
   3. Tap Installed
   4. Locate TotilPay Go and tap Permissions
   5. Enable all requested permissions
2. Press and hold the black power button on the side of your card reader to power it on.
3. Login to the TotilPay Go app on your Android.
4. Tap More.
5. Tap Transaction.
6. Tap Card Reader.
7. Tap Chipper BT. Blue font indicates the currently selected reader type.
8. Tap the Configure button to summon the Chipper BT pairing overlay.
   • This button is located in the top-right corner and looks like sliding switches.
9. Tap the arrow on the right side of the Name field.
   • Your card reader's serial number will appear under Scanned Devices.
10. Tap your reader's serial number to begin the pairing process.
    • When pairing is complete, a blue check will appear to the right of your reader's serial number.
11. Tap your reader's serial number again to confirm pairing is complete.
12. Confirm your Bluetooth card reader's serial number now appears on the Name label.
13. Tap the back arrow.
14. Confirm the colored dot in the upper-right corner of the reader type label is green.
    • A green dot indicates your Bluetooth card reader is paired and connected to your Android.
    • Tap the Information button to view important reader information, such as battery percentage and firmware version.
    • A red dot in the upper-right corner of the reader type label indicates no reader connected.

Need help pairing your reader? NDG Support is here to help! Please send an email to support@novodiagroup.com or call us at 888-377-7884.